Maybe its insanity that makes me experience a bit of delight in a finely honed and deburred seattube. Loosen the clamp bolt, and the seatpost effortlessly slides in and out with no twisting and grunting, and no unsightly gouges. Most metal seattubes could benefit from a quick hone to remove any burrs or paint that may interfere with the post’s movement.

The above picture is one kind of hone that fits into a drill chuck. About $20 should get you the appropriately sized one at an auto parts store, and a quick zip inside the seattube is all thats needed to make sure that post fits how it should.

Your local shop should have a means of deburring your seattube, and should be extra careful to do so if you’re using a carbon post prone to scratching. If you ask the shop about a hone and they shrug their shoulders, it may be time to find another shop.